Sunday, April 21, 2013
Light Dependent Resistors
LDRs or lightweight Dependent Resistors are terribly helpful particularly in light/dark sensor circuits. Normally the resistance of an LDR is incredibly high, typically as high as a thousand 000 ohms, however once they are illuminated with lightweight resistance drops dramatically.
The animation opposite shows that when the torch is turned on, the resistance of the LDR falls, permitting current to have it.Circuit Wizard software has been used to show, the vary of values of a ORP12, LDR .
When a light-weight level of a thousand lux (bright light) is directed towards it, the resistance is 400R (ohms).
When a light-weight level of ten lux (very low light level) is directed towards it, the resistance has risen dramatically to ten.43M (10430000 ohms).
This is an example of a light-weight sensor circuit :
When the sunshine level is low the resistance of the LDR is high. This prevents current from flowing to the bottom of the transistors. Consequently the LED doesnt lightweight. However, when lightweight shines onto the LDR its resistance falls and current flows into the bottom of the primary transistor and then the second transistor. The LED lights.
The preset resistor will be turned up or right down to increase or decrease resistance, during this means it will build the circuit additional or less sensitive.
When the sunshine level is low the resistance of the LDR is high. This prevents current from flowing to the bottom of the transistors. Consequently the LED doesnt lightweight. However, when lightweight shines onto the LDR its resistance falls and current flows into the bottom of the primary transistor and then the second transistor. The LED lights.
The preset resistor will be turned up or right down to increase or decrease resistance, during this means it will build the circuit additional or less sensitive.
